half wall

1. first thing we did was made sore that we had the right P.P.E (gloves, goggle and steel toe cap boots). we wore goggles to protect our eyes from any brick dust or any pug that might of been accidentally flicked. we wore steel toe cap boots to protect our feet in case we were to drop any bricks while transporting them. we wore gloves to protect our hands from the lime in the pug and on the bricks. 
2. we went and got the materials of witch was 15 facing bricks and three half bricks
3. we then marked out the lenght of the wall and checked the floor level. we marked out the lenght of the wall so that we could use that as a ruff guild line.
4. we then layed the first stage and made shore that it was leveland that the pug were all evenly spread.the first stage consists of 5 bricks
5. we then layed the second stage and made shore that it was all level. the second stage consists of 4 bricks and one half brick.once we had layed the second stage we used the level to make shore we are going straight up and not cricked.
6. we then carryed on in that order (one brick then one half brick) for the rest of the stages till we got to stage six and once that were done we cleaned up the  half wall and around the wall for the photo.
7. once we took the photo we then took down the wall a brick at a time so that we did not make to much mess once we done that we cleaned all the equipment and put all the materials back for the next person.
8. finaly we cleaned our work area and repoted that we were done.