we first went to view the property and determent the amount of work and then creat a quote. once we got the job we will then make sure we have the correct P.P.E ( gloves, goggles and steel toe capped boots). once we had to corect stuff we then hired a scafold and made sure that the suppliers set it up.once all the scafold was set up. we will then use the slate ripper to take out the old screws and we will then carfully pull the broken slate tile making sure that no parts of the broken tile falls. once we removed the broken tile we will then attach a pice of lead to the tile under neath once that is attached we will then slide the slate tile into posision and bend the lean over the top of the tile to hold it in place. once that is done we will then clean up and dismantal the scaffold.
- slate ripper
- hammer
- broom
- brush
- dust pan
- bin
- tap measure
- slate
- galvanised nail
- lead strip
risk assessment
- There is a risk of slate falling and hitting some member of the public so you should use a cargo net to catch any falling debree.
- There is a risk of falling as we will be working at a height so we will use a harnice attached to the scaffolding
- There is a risk of cutting your self with the broken bits of slate so we will wear P.P.E (glove, goggles and steel toe capped boots)
limitations
one of the limitations of slate roofing is that it is very heavy and some roof may not be able to support it so they have to be reinforced.
An other limitation of slate roofing is the cost slate is quite expensive
common defects
Mineral Inclusions : Slates with mineral inclusions, the wash-out of minerals in some slates can lead to holes and leaks
nail fatigue : where the nail rust and need to be replaced.
quote
£39 for slate tiles x 1 box
£35.20 per week x 1 week
£30 per hour x 3 laborers
£10 materials (lead and nails)
£10 fuel
total = £214.20
No comments:
Post a Comment