door frame

1. first we made sure we had the correct P.P.E (gloves, boots and goggles) we wore glove to protect our hands from splinters. we wore goggles to protect our eyes from any foreign objects. we wore steel toe capped boots to protect our feet incase we were to drop something heavy.
2. the next thing we did was to get all the materials and tools we needed.
3. we then marked out where to cut on the wood. after we marked out we then cut down the two line and chilsed out the wood.we done this twice
4. we then marked out a smaller bit of wood wich was going the be the top of our door frame.
5. then we assembled the frame on the ground making sure that the frame is square.
6. once the frame is assembled we then wedged it into place making sure that it is level.
7. finally we cut of the ends of the wedges and cleaned up the workshop. 
8. the next stage was to plaster the stud wall.