Common Defects
clay pipes crack because they get to old, also when
water runs through them for over a period of years it will start to decay.materials:
The materials that we used for this job were two pipe connectors.
Defects in the materials:
The screws could become loose after a while and could also become rusty.
Tools:
· Saw Hacksaw· Pencil
· dust pan
· broom
· bin
Risk assessment:
The risk assessment for this job is basically to
wear your PPE and to be careful around a wet area, this is so that you don’t
slip over. The PPE is so that you don’t get any sewage into cuts on your hands
or so that when your cutting the pipe you slip and catch your foot, this is why
you have to wear steel capped boots. Wear goggles just in case sewage water
gets into your eyes.
Method statement:
Before you start the job make sure you get the
tools you need ready, first mark out the part of the pipe you need to repair
get a saw and cut the pipe where you have the cut marks when you have cut the
pipe on one end of the pipe put a pipe connector and make sure it goes half way
down when you have got it on the pipe tighten it up and put it on the pipe and
tighten that end when you lay the pipe down against the other side mark off
where the pipe end and the cut that part off. when you have done that slide the
other pipe connector on the pipe then slide it across on to the other part of
the pipe then tighten both sides up and make sure you have tightened them
enough so it don’t leak
quote
pipe connectors =£20
labour 3 men=£25
fuel =£15
Total:60
No comments:
Post a Comment