attaching wast to sink

The common defects

one of the common defects is if one of the sealing rings are broken the the wast will proberly leak.

Materials

• bottle trap
• wast pipe
• elbow joint
• ring seal

limations

one of the limations is that if the seals are not tightend properly they can leak so befor testing we shall dobble check all seals.

Tools

• ajustable spanner
• hack saw
• boat level
• broom
• bin
• dust pan

risk assessment

there is a risk of slipping if any water spills so to reduce this risk will shall keep moping up any spills and we shall make sure that the public is aware of the risk by puttign up signs.

method statment

The first thing we have to do is to view the property and determent how much work is needed and the amount of time it will take. The next thing we will have to do is to get all the required materials and tools. We then will send a quote and if the client is happy we will then proceed with the work. we then first attach the trap to the bottom of the sink onc ethat is sercure we then we then attach an elbow joint to the trap. after that was sercure we the attached a 32mm wast pipe once that was surcured in to the right place we then attached another elbow joint sercured to the wast pipe. one that was all sercured we then attched another 32 mm waist pipe heading straight in to the bucket. once that was all done we tested it makine sure that there is no leaks. we then tidyed up and repoted that the job were done.    



quote

After carefully viewing your property i have come to a conclusion and hope that you will be happy with the quote any problem please do not hesitate to contact us.

bottle trap = £3.00
32mm wast pipe = £4.00
elbow joint = £8.00
labour = £60.00
fuel = £10.00



total = £85.00