The common defects to plastic pipe
Impact damage during installation
The Pipes can easily break
Can crack easily due to pressure.
Materials
·
Plastic pipe 15mm x
25m £70 (1)
·
90 degree pipe
coupling 15mm £5 (1)
·
Straight pipe
coupling 15mm £5 (1)
·
Equal tee fitting
and inserts 15mm £10 (2)
·
Plastic pipe
inserts £2 (10)
The defects and limitations of
·
It is very flexible
· We have different types of sizes
Tools
·
Buckets
· Rench
·
Dust sheets
·
Screw driver
(flathead)
·
PVC plastic grip
cutters
PPE
·
Boots
·
Gloves
·
Goggles
Risk assessment
Sharp pipe ends may cause cuts
Cutting finger using PVC cutters
We wear correct PPE. To prevent these risks from happening. To stop
cutting your fingers when like cutting they pipe keep hands away and always on
handles and keep away form they blade. Then last wear gloves or fill then end of
pipe so you don’t cut your self, we are working to they health and safty act of
1974.
Method statement
We first got our PPE on, and then we made way to the area of work and
seen the problem. So we looked and found the main water simply, trend it off
after we put a bucket under the component joint from the pipe and tock it out.
We got the pipe and cut to about 50mm with a par of PVC grip cutters. Refitted
back in place and testes for any leaks then finished (plus clearance).
Quote
Dear customer
We have inspected
the plastic pipe work and found a split in a section of
the plastic piping
We
turned of the water form the pipe that was leaking and put a bucket under to
stop water from going everywhere and a dustsheet to protect it from spreading
over the area.
Next we had a look at the components we are needed and the way to
reinstall it.
We
cut a of pipe to the same size and then resouldered the fitting and then put it
back in place.
Then we test to
see any leaks and problems then finished and pack away (plus
clearness).
Times
6
hours
The cost of all
the materials and labour will cost £340.00
•
Materials plus fuel
£120
•
Labour £20 per
hour
Total cost £340.00
No comments:
Post a Comment